Rapid Self-Selecting and Clone-Free Integration of Transgenes into Engineered CRISPR Safe Harbor Locations in Caenorhabditis elegans

Precision genome editing for model organisms has revolutionized functional analysis and validation of a wide variety of molecular systems. To date, the capacity to insert single-copy transgenes into the model nematode Caenorhabditis elegans has focused on utilizing either transposable elements or CRISPR-based safe harbor strategies. These methods require plate-level screening processes to avoid selecting heritable extrachromosomal arrays or rely on co-CRISPR markers to identify knock-in events. As a result, verification of transgene insertion requires anti-array selection screening methods and PCR genotyping. These approaches also rely on cloning plasmids for the addition of transgenes. Here, we present a novel safe harbor CRISPR-based integration strategy that utilizes engineered insertion locations containing a synthetic guide RNA target and a split-selection system to eliminate false positives from array formation, thereby providing integration-specific selection. This approach allows the experimenter to confirm an integration event has taken place without molecular validation or anti-array screening methods and is capable of producing integrated transgenic lines in as little as five days post-injection. To further increase the speed of generating transgenic lines, we also utilized the C. elegans native microhomology-based recombination, to assemble transgenes in-situ, removing the cloning step. We show that complete transgenes can be made and inserted into our split-selection safe harbor locations starting from PCR products, providing a clone-free and molecular-validation-free strategy for single-copy transgene integration. Overall, this combination of approaches provides an economical and rapid system for generating highly reproducible complex transgenics in C. elegans.

The introduction of transgenes is a staple in the molecular biologist's toolkit, with a broad range of utilities including expression of individual variants, ectopic expression of tagged native genes, and the addition of genes from other species. Injection of double-strand DNA into the Caenorhabditis elegans gonad arm generally results in assembly of these fragments via regions of microhomology, leading to the formation of extrachromosomal arrays (Stinchcomb et al. 1985;Mello et al. 1991). These extrachromosomal array structures can be in excess of 1 Mbp and contain up to hundreds of copies of the injected gene (Mello et al. 1991;Woglar et al. 2019). Extrachromosomal arrays are not stably inherited-either between cells within an individual or between generations-and have variable expression levels, which can be problematic depending on the biological question. To avoid the stochastic element of array expression, it is often desirable to integrate transgenes. Historically in C. elegans, microparticle bombardment (Praitis et al. 2001) and ultraviolet light exposure (Evans 2006) or gamma exposure (Mello and Fire 1995) have been used to integrate transgenes randomly. However, these methods are less than ideal as: integration usually results in multiple copies, which can impact expression; the integration location is random which can disrupt expression of native genes or insert the transgene into regions prone to transcriptional silencing; and both methods require expensive and specialized equipment to create transgene integrations and to identify the loci of insertion. More recent approaches have utilized transposon-based integration methods such as MosSCI and miniMos (Frøkjaer-Jensen et al. 2008, which use a transposon to create a double-strand break, allowing for single transgene integration into a predefined or random region respectively. Recently, CRISPR/Cas9 techniques have been adopted for transgene integration. These approaches include generalized methods for transgenic cargo insertion, such as those using a selective marker like Hygromycin B resistance (Chen et al. 2013) or a self-excising cassette (SEC) (Dickinson et al. 2015;Kasimatis et al. 2018). More specialized CRISPR strategies, such as the SKI LODGE method, facilitates tissue-specific expression by splitting the coding and promoter element (Silva-García et al. 2019). A particular advantage of this latter strategy is that it introduces modular transgene integration, allowing for a more straightforward integration into a backbone of standard genetic elements that are pre-integrated within a safe harbor location.
Regardless of whether a transposon or CRISPR/Cas9 strategy is used, integration of the transgene by homology-directed repair (HDR) is generally inefficient compared to non-homologous end joining (NHEJ) (Frøkjaer-Jensen et al. 2008;Dickinson et al. 2013Dickinson et al. , 2015Ward 2015). Both MosSCI and CRISPR show approximately the same integration efficiencies which varies greatly depending on the transgene. CRISPR and MosSCI also require robust screening methods to identify the rare correct transgene integration. Co-CRISPR simultaneously targets a second gene to generate a visible phenotype (e.g., dpy-10) (Arribere et al. 2014;Kim et al. 2014), thereby allowing identification of a sub-population with active Cas9 expression and genome targeting. This enriched population must then be further screened, generally by PCR and Sanger sequencing, to identify correct integration events at the desired locus. In general, co-CRISPR is not widely used for transgene integrations, though there are exceptions (Farboud et al. 2019;Silva-García et al. 2019). In the case of selectable genes, the transgene generates a visible phenotype displayed not only by integrants but also individuals with heritable extrachromosomal arrays because the injected donor homology contains a fully functional copy of the selectable gene. Distinguishing extrachromosomal arrays from integration events requires anti-array selection techniques such as heat shock induction of peel-1, a toxic transgene (Seidel et al. 2011;Frøkjaer-Jensen et al. 2012;McDiarmid et al. 2020) and visual screening for loss of an additional gene used to mark the array (e.g., fluorescent protein or rol-6). These methods are imperfect and molecular methodologies such as genotyping PCRs must be used to verify genuine integrations. Currently, no method is available for C. elegans that provides integration-specific selection of transgenes. Such a screen would fit into the category of a "screen from heaven" where only the desired transgenic integrant is alive on the petri dish (Jorgensen and Mango 2002).
In most cases, transgenes must be cloned into plasmids with homology arms matching the targeted genomic region for single-copy integration. This process requires various cloning strategies for each desired transgene. C. elegans can recombine fragments with microhomology and express resulting transgenes in an array (Mello et al. 1991;Kemp et al. 2007). Others have tested this strategy to create a donor homology for transgene integration. For example, Paix et al. (2016) and Philip et al. (2019) attempted to overcome the cloning obstacle by integrating transgenes with overlapping PCR fragments that, once recombined in-situ, should produce a functional gene. However, as with plasmid-based templates, neither method provides direct selection for the transgene integration. As such, depending on the design, array formation can provide false-positives, increasing the difficulty of identifying a correct assembly and integration-a notable complication.
Here, we present a novel transgene integration strategy that utilizes a custom-designed safe harbor location to eliminate many of the steps required to go from concept-to-integrated transgene. Our approach removes the selective advantage from the array and selects only for the integration event by splitting the coding sequence for Hygromycin B resistance. Additionally, we show the cloning stage can be bypassed in this system, utilizing the worms' native homology mediated repair to clone our transgene in-situ. Coupling these methods can reduce the labor and time required to produce a transgenic nematode, allowing the experimenter to go from PCRto-integrated transgene in approximately one week.

Molecular biology
All plasmids unique to this publication are listed in Table S2, and all primers used in this study are listed in Table S3. All-in-one-plasmids encoding both Cas9 and the desired sgRNA were created by sitedirected mutagenesis of pDD162 (Addgene ID47549) (Dickinson et al. 2013) using the Q5 site-directed mutagenesis kit (NEB) per manufacturer directions. Guide and Cas9 sequences were confirmed by Sanger sequencing. The guide targeting Chromosome II:8420188-8420210 has been previously described, and the constructed plasmid (pMS8) is equivalent to pDD122 (Addgene ID47550) (Dickinson et al. 2013). Synthetic guide sites utilized in the landing pads were based on guides previously shown to be highly efficient in other species or generated based on predicted efficiency scores (Table 1). Predicted offtarget effects were determined using the method of (Doench et al. 2016) while predicted on-target efficiency was calculated using Sequence Scan for CRISPR (Xu et al. 2015) and the method of (Hsu et al. 2013).
Repair template plasmids were assembled from overlapping fragments using the NEBuilder HiFi Kit (NEB) per manufacturer instructions. For the landing pads, the Cbr-unc-119 rescue gene and a portion of the homology arms containing the guide site were removed from pCFJ151(Addgene ID19330) (Frøkjaer-Jensen et al. 2008) and replaced with a multiple cloning site to create pMS2. The SEC from pDD285 (Addgene ID66826) (Dickinson et al. 2015) was then inserted into SacI digested pMS2 to create pMS4. The C-terminal portion of the hygromycin resistance gene and the unc-54 39 UTR were then independently amplified from pCFJ1663 (Addgene ID51484) (from the lab of Erik Jorgensen) and inserted into the SbfI site of pMS4 to create the final landing pad plasmids (pMS70-75). The six synthetic guide sites were included in the primers used to amplify the hygromycin resistance fragment (Table 1, Table S2, and Table S3). A complete annotated sequence of pMS74 can be found in Figure S1.
To generate an rpl-28p::mKate2::unc-54 39UTR reporter, rpl-28p amplified from pBCN39-R4R3 (Addgene ID34914) (Semple et al. 2012) and the mKate2 coding sequence and unc-54 39UTR amplified from pDD285 were inserted into SacI digested pMS2 to give pMS12. The reporter was then amplified from pMS12 and inserted into an intermediate construct containing: rps-0p and the N-terminal fragment of the hygromycin resistance gene from pCFJ1663 (amplified in two fragments to remove intron), a pUC57 backbone, a truncated 59 genomic homology arm from pMS2 and artificial sequences; to give the final insertion vector pMS81. A complete annotated sequence of pMS81 can be found in Figure S2. A second split hygromycin insertion vector, pZCS52, was made by amplifying the homology arms and split hygromycin from pMS81 by PCR and adding the sqt-1(e1350) gene amplified from pDD285.

Strain generation by CRISPR/Cas9
A mixture consisting of 50 ng/ml pMS8, 10 ng/ml of the appropriate landing pad plasmid and 2.5 ng/ml pCFJ421 (Addgene ID34876) (Frøkjaer-Jensen et al. 2012) was microinjected into the gonad of young adult N2 hermaphrodites. Screening and removal of the SEC were done following Dickinson et al. (2015). Presence of the insertion and removal of the SEC was confirmed by PCR and Sanger sequencing (Table S3). Confirmed transgenics were backcrossed once to N2 to create the final strains PX692-PX697 (Table 1, Table S1).

Quantification of synthetic guide RNA efficiency
For each landing pad strain (PX692-PX697), a mixture consisting of 50 ng/ml of all-in-one plasmid targeting the corresponding synthetic guide site and 10 ng/ml pMS81 was microinjected into the gonad of young adult hermaphrodites. Following injection, all worms were maintained at 25°for the duration of the experiment. Injections were performed until approximately 60 broods per strain had at least one F1 progeny expressing the fluorescent donor homology, thereby marking the brood as successfully injected. Broods were screened for fluorescence at approximately 48h post-injection (hpi), and all fluorescent individuals were counted regardless of developmental stage ( Figure S3). Hygromycin B was then top spread to plates at a final concentration of 250 mg/ml and plates were then screened starting five days later for resistant progeny. Individuals from surviving broods were PCR screened to confirm correct integration.
Removal of the hygromycin selectable marker with Cre A confirmed homozygous integrant line for rpl-28p::mKate2::unc-54 39UTR was injected with 10 ng/ml of Cre expression plasmid pZCS23 and 10 ng/ml pCFJ421 co-injection marker. 30 co-injection marker positive F1 individuals were screened by PCR for the removal of the hygromycin gene. F2 progeny from 3 of the most promising candidates were then rescreened to confirm homozygous removal.
In-situ assembly for integrated transgenes Two or six PCR fragments with 30bp overlaps, covering the sqt-1(e1350) gene, were amplified from pDD285 using Q5 polymerase (NEB) per manufacturer instructions. Homology arms with 30bp overlaps to the sqt-1(e1350) gene were similarly amplified from pMS81. These homology arms were then complexed with the adjoining sqt-1(e1350) PCR fragment through a second round of PCR.
For in-situ assembly and integration, a mixture consisting of 50 ng/ml pMS79, 5 ng/ml pZCS16, and 40 fmol/ml of each of the appropriate gel purified PCR products was microinjected into the gonad of young adult PX696 worms. As a control, 10 ng/ml pZCS52 was substituted for the PCR products. Following injection, all worms were maintained at 25°for the duration of the experiment. After 24 hr, injected adults were moved to new plates to facilitate counting. F1 individuals were screened for red fluorescence ( Figure S4) and the roller phenotype at 3-4 days post-injection. Hygromycin B was then added to plates at a final concentration of 250 mg/ml. Each day for five days post-exposure, plates were scored for hygromycin resistance. Individuals resistant to hygromycin and with the roller phenotype were singled without hygromycin and screened for Mendelian inheritance of the roller phenotype to indicate an integration event. Lines with promising candidates for single copy-integration were singled until they produced homozygous rol progeny, which were then screened for the presence of the wrmScarlet co-injection marker, genotyped by PCR across the insert and Sanger sequenced for correct transgene assembly and integration (Table S3).

RESULTS
Generation of synthetic split landing pad sites Current methods of transgene insertion in C. elegans do not specifically select for integration and therefore require additional phenotypic or n■ a Predicted guide efficiency as per (Doench et al. 2016) b Predicted guide efficiency as per (Xu et al. 2015) c Predicted off-target effects as per (Hsu et al. 2013) PCR screening or anti-array selection to avoid selecting heritable extrachromosomal arrays. We sought a faster and simpler method by using CRISPR/Cas9 genome engineering to custom-designed synthetic split landing pads (SLPs). A split uracil selection system has been developed for yeast, whereby a functional URA3 gene is reconstituted by an integration event. Therefore only transgenic cells survive in the absence of uracil (Levy et al. 2015). We reasoned a similar system could be adapted to C. elegans. Hygromycin resistance was chosen as the selectable event as it works across C. elegans strains, provides more substantial selection than other antibiotic resistance genes, and does not rely on mutant backgrounds such as with unc-119 rescue (Radman et al. 2013). An artificial guide site plus the 39 hygromycin coding sequence and transcription terminator were integrated into the target genome site as part of the SLP, whereas the promoter and 59 portion of the hygromycin coding sequence were included in the repair plasmid ( Figure 1A). A central 504bp region was included in both fragments, allowing for homology-directed repair. Since a complete resistance gene is not present in either the insertion strain or extrachromosomal arrays containing the repair plasmid, only individuals with proper homology-directed repair have a functional hygromycin resistance gene and survive hygromycin exposure ( Figure 1B-D).
The SLP was inserted at Chromosome II:8,420,157. Both this general region and this specific CRISPR site have been shown to be permissive for gene expression, including germline expression (Frøkjaer-Jensen et al. 2008Dickinson et al. 2015). The SLP was introduced using the SEC selection method, and removal of the SEC left a loxP site downstream of the hygromycin resistance gene terminator ( Figure 1A). By also including a loxP site upstream of the promoter in the repair template, this allows for optional removal of the HygR gene in confirmed integrants by injection of a Cre expressing plasmid ( Figure S5).

Efficiency of transgene integration
Given that the SLP is entirely artificial, the guide site can be of the experimenter's choosing. As previous work has shown that the choice of guide site can influence integration efficiency (Farboud and Meyer 2015), we made six different SLP strains, each differing only in their guide site (Table 1). Five of these were sites previously shown to be highly efficient in other model organisms, while the sixth was designed to maximize the predicted guide efficiency. All had very low predicted off-target effects. We developed a rpl-28p::mKate2 reporter plasmid (pMS81), with homology arms compatible with each of the six SLPs. We then tested integration efficiency into all six SLPs. The plasmid also functions as a co-injection marker and extrachromosomal arrays should result in mKate2 positive, hygromycin sensitive animals. 1.4-9.6% of successfully injected broods (as determined by the presence of at least one mKate2 positive individual at 48 hpi) produced hygromycin resistant individuals. Overall, 79.2% of hygromycin resistant broods (19 of 24) also had perfect integrations events as determined by PCR (Table 1). Imperfect integrations are most often the result of HDR on one side of a double-strand break and incorrect integration on the opposite side, a known issue with transgenic integrations, although rearrangements within the transgene also occur, likely as a byproduct of the array assembly process (Stinchcomb et al. 1985).
Overall, we found three guide sites to have similar relatively high efficiencies, while one was slightly less efficient and the other two were much less efficient. The observed efficiencies were not always consistent with the predicted guide site efficiencies. For the top three guide sites 7.9-9.6% of co-injection marker positive broods contained integrants (not all of which were correct) which equated to approximately 300-450 co-injection marker positive progeny per integration event. In our hands, injection of thirty total individuals from any of the four best-performing strains was nearly always sufficient to obtain at least one correct line. This is on par with Figure 1 Overview of Integration Specific Selection. A) The Synthetic Landing Pad (SLP) with synthetic guide RNA target sequence, the 39 fragment of the hygromycin resistance gene (partial coding sequence and UTR), and a single loxP sequence. B) The donor homology with cargo transgene to be inserted, a second loxP sequence, and the 59 fragment of the hygromycin resistance gene (promoter & partial coding sequence). C) Cas9 & guide expression plasmid is injected with donor homology. Cas9 targets and creates a double-strand break at the synthetic target location. D) Once the double-strand break is made, repair with the donor homology integrates the transgenic cargo, and restores the hygromycin gene, allowing selection to occur only upon integration.
other transgene integration methods directed at this region (Frøkjaer-Jensen et al. 2008Dickinson et al. 2013Dickinson et al. , 2015 which have variable integration efficiencies depending on the transgene, but generally range from 5-30% with a few exceptions reaching higher frequency (Frøkjaer-Jensen et al. 2012). As previously observed (Paix et al. 2014), broods with larger numbers of co-injection marker positive progeny (jackpots) were the most likely to yield integrants. However, this number was not predictive of perfect vs. imperfect integration ( Figure S3).

In-situ donor assembly and integration
While plasmids offer the advantage of producing large quantities of the repair template, they require time and labor to produce. Standard cloning practices require a source of DNA, a ligation step, bacterial transformation, plasmid purification, and verification. As we sought to both simplify the process and reduce the overall timeto-integration, we attempted to bypass the cloning step and utilize the C. elegans native homology-directed repair to produce a transgene (Figure 2). While clone-free transgenesis has been previously demonstrated in C. elegans (Paix et al. 2016;Philip et al. 2019) we wanted to see if this process could synergize with the split-selection system to further improve the process as the previous work did not provide direct selection on the integration event. To test this approach, we utilized the sqt-1(e1350) mutation as it gives a dominant roller phenotype allowing us to assay for in-situ assembly. Transgene integration was most efficient for the plasmid vector, with 20% of co-injection marker positive broods containing an integrant. However, confirmed in-situ assembled and integrated sqt-1 genes were also obtained using both two and six PCR fragments (Table 2, PCR Confirmed Integrations). Two parts correctly assembled and integrated more often than six parts. In some cases, hygromycin resistant individuals were observed without the sqt-1 roller phenotype (Table 2, Hygromycin Resistant Broods). We believe these represent incorrect integration events, where at least the 59 hygromycin resistance coding fragment was integrated into the genome. As these cannot be correct integration and assembly events, we did not pursue or characterize them.
For two-part assemblies, most hygromycin resistance events were accompanied by sqt-1 assembly and integration, as indicated by the ability to isolate homozygous roller populations. However, not all of these insertions matched the expected sequence. Two of the eight insertions could not be amplified by PCR, suggesting larger scale errors, while three had point mutations identified during Sanger sequencing, and three had no detectable errors. In no case did we detect multiple copy insertions. In the six-part experiment, all resistant plates had non-roller (incorrect) integration events, with a few having roller individuals as well (Table 2, Hygromycin Resistant Broods). In most cases, a homozygous roller line could not be isolated, suggesting these individuals were the result of correctly assembled genes in arrays paired with incorrect integrations. In one case, a homozygous roller line could be isolated, indicating multiple integration events had taken place in that brood. In this case, the roller causing integration had a correctly assembled sqt-1 gene but also contained a second copy of one of the homology arms which was identified by Sanger sequencing.
The inclusion of a fluorescent co-injection marker allowed for monitoring of array loss in this experiment. Since there is no selection on the transgene containing plasmid, any arrays that form should be rapidly lost. As expected, prior to the addition of hygromycin, array positive individuals could be seen. However, none of the homozygous individuals isolated for sequencing (approximately 3-5 generations after injection) contained arrays, demonstrating arrays are indeed quickly lost in this system. Even so, it remains best practice to confirm array loss through either use of an array co-injection marker or a vector specific PCR performed in conjunction with the genotyping PCR. Figure 2 Overview of in-situ assembly. A) Amplification of homology arms and cargo fragments by PCR with overlaps of 30bp B) Optional complexing by a second round of PCR reduces the number of fragments and increases the frequency of correct integration. C) Upon microinjection, PCR products are recombined by the worm using microhomology to make D) the complete donor homology ready for integration.

DISCUSSION
We have created a fast and efficient strategy for integrating transgenes into the C. elegans genome that bypasses some pitfalls and laborious steps present in other methods. Combining split selection with selfassembly of repair templates takes what before would require at best two to three weeks down to as little as a week, while simultaneously reducing the required expertise and overall hands-on time (Figure 3). The core technology relies on integration-specific selection, made possible by SLPs at a safe harbor insertion site. These SLPs can be inserted into any C. elegans strain using a single set of reagents since the protocol presented does not rely on a particular genetic background. The landing pad presented is universal, and the experimenter can choose any type of cargo to be integrated utilizing either plasmids or our Clone in-situ (CIS) approach. However, the SLP design could be modified with additional elements to facilitate specific types of insertions, such as reporter constructs or allelic variants. While we see no obvious phenotypic effects from the constitutive expression of hygromycin resistance protein, the SLP includes loxP sites, allowing for a second injection of a Cre expression plasmid to remove the hygromycin gene. While removal by Cre injection is relatively efficient (Figure S5), if routine removal of hygromycin is desired, incorporation of inducible Cre and a marker gene into either the landing pad or insertion vector would allow for self-excision using a protocol similar to SEC (Dickinson et al. 2015). Further, additional SLPs using either the same or different guide and selective gene could be inserted into other sites in the C. elegans genome known to be permissive for transgene expression. This would facilitate the construction of more complex, multigene transgenic nematodes. The antibiotics neomycin (Giordano-Santini et al. 2010), puromycin (Semple et al. 2010), blasticidin (Kim et al. 2014) and nourseothricin (Obinata et al. 2018) have all been used for selection in C. elegans, and the coding sequences of the corresponding resistance genes could be split. When using multiple SLPs within the same genetic background, lox site variants (e.g., lox511I, lox2272, loxN) should be considered to prevent intrachromosomal recombination. The SLP, conceptually adopted from yeast, does not need to be restricted to C. elegans. While the formation of heritable arrays is unique to Caenorhabditis nematodes among model systems, and thus does not complicate single-copy integration transgenesis in other models, the concept of custom-designed SLPs could provide direct readouts for integrations events, with specific, custom-built guide target sequences. For example, a split fluorescent coding sequencing could suffice to screen injected embryos for proper, site-specific integration in model vertebrates and be coupled with a non-native, experimentally chosen guide RNA to reduce off-target effects while increasing on-target cutting and HDR.
The ability of C. elegans to self-assemble exogenous DNA fragments based on microhomology represents a possible alternative to plasmid cloning for insert assembly. Individuals with an assembled and integrated transgene were seen using both two or six PCR products. However, six pieces resulted in fewer correct integration and more incorrect integrations (Table 2, Hygromycin Resistant Broods), suggesting that, as expected, proper assembly occurs more often with fewer PCR products. As such, it is likely desirable to complex PCR products by overlap PCR before integration where feasible. While the use of PCR products, rather than plasmids, represents a more rapid protocol with fewer technical steps, it comes with the trade-off of a lower frequency of correct integrations requiring injection and screening of a larger number of worms. Thus, while use of PCR products results in a shorter time to integration n■  Figure 3 Experimental Overview. A) Injections of PCR fragment or cloned donor homology with Cas9 and guide expression plasmid. With PCR products, in-situ assembly forms the cargo transgene. B) Two days after injection, worms are exposed to hygromycin B. Since the array does not provide selection C) only integrated worms survive the exposure, providing the integration-specific selection.
confirmation, the total amount of hands on time is similar between the two protocols. Ultimately, at this time, choice of PCR products vs. plasmid will largely come down to lab preference, although certain protocols, such as insertion of a library of similar constructs may favor the PCR approach. Importantly, SLP based integration-specific selection is fully compatible with both cloned plasmid donors and the CIS approach. Site-specific transgene insertions rely on homology-directed repair (HDR). However, non-homologous end joining is almost always the prevalent pathway in repairing a double-stranded break (Ward 2015;Xu et al. 2015). During guide efficiency testing, the top three guides all had similar insertion frequencies, suggesting we are approaching the upper limit of cutting efficiency and that further improvements will require improved rates of HDR. Furthermore, improved HDR should assist in the assembly of PCR products in worms and reduce the rate of false positives due to incorrect assembly. Low rates of HDR are not specific to C. elegans and impair HDRbased insertion in many model systems. As a result, multiple HDR enhancement strategies have been proposed in multiple model organisms (Beumer et al. 2008;Böttcher et al. 2014;Ward 2015). Adaptation and advancement of one or more of these methods will likely represent the next breakthrough in genome editing efficiency in C. elegans.

ACKNOWLEDGMENTS
This project was supported by grants from the National Institutes of Health (training grant T32 GM007413-42 to ZCS and R01 AG56436, R35 GM131838 to PCP). We would like to thank Erin Petruccione for technical assistance and Stephen Banse for helpful discussions and comments on the manuscript, as well as suggestions from reviewers.